Full room re-plastering in Walthamstow. Blown plaster off back to the brickwork, bonding coat, then finish — the right job where a skim would only hide the problem.
Re-plastering is the honest answer when the original has gone rather than just gone tired. On a Walthamstow terrace that usually means a wall that sounds hollow across most of its area, or one that has been patched so many times there is no consistent surface left to work onto.
In the older streets around Wood Street and Leyton, re-plastering is often the moment to deal with walls patched in several different materials over the years, lime, gypsum and cement side by side. Those patches dry and move at different rates, which is why cracks keep returning in the same places, so the wall is taken back to one consistent base.
Failed plaster hacked off to bare brick. It is the noisy, dirty part of the job and it is the part that decides whether the new work lasts.
Old London brickwork is rarely flat. Bonding brings the wall out to a true plane before any finish goes near it.
External corners and reveals beaded so they are straight and stay straight. A hand-formed arris chips the first time something knocks it.
Two coats of finish, the room swept, and the waste taken away rather than left in bags by the front wall.
Cement and gypsum patches cut back along with the failed plaster, so the new work goes onto one consistent surface rather than a patchwork.
Windows cracked open and the heating kept low while the plaster cures, because forcing it dry with heaters is what causes shrinkage cracks.
Send a photo or a quick video of the room on WhatsApp, or get a free fixed quote — no obligation, and we’ll tell you straight what it needs.
Sometimes one wall genuinely is the problem. But a freshly plastered wall next to three tired ones is very visible under a light, so we will tell you honestly when doing the room is only a little more work for a much better result.
Three to four days on a standard Walthamstow room - a day to strip out, a day for bonding, then finish, plus drying. It is the most disruptive plastering job there is and worth doing before flooring or a kitchen goes in, never after.
Roughly double, and honestly so - it is a different job with a strip-out, waste removal and an extra coat. What it buys you is a wall that is genuinely sound rather than a smooth surface over a failing one.
Yes. The room itself is out of use and the strip-out day is loud and dusty, but the doorway is sealed and the route through the house protected, so the rest of the home stays usable.
On a solid brick wall that needs to breathe, a lime-based system is often the better choice, especially where moisture has been a problem. On a dry internal wall a modern bonding and finish system is usually fine. Which suits your wall is explained before the work starts.